Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

2x4 project Circle Box 1/4 flat router bit

32 likes
307 opens
167 copies
0 comments
Andrew Petzold

Project by

Andrew Petzold

General Information

A circle box made from a 2×4 using a 1/4 router bit.
Recommended:
1. set depth per pass to be 20% of over all thickness of the wood.
2. make sure you zero x and y at low as possible on the piece of wood.

Like this project Open in Easel®