Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Candle Holder

32 likes
233 opens
37 copies
668 downloads 0 comments
Beyond Design

Project by

Beyond Design
Chicago, Illinois

General Information

Designed to fit 2" diameter pillar candles, this stand uses MDF ribs to create a colorful wall structure. As the candle runs low the light flickering through will change. A runny candle will create a nice effect as it starts to fill in between the ribs.

Like this project Open in Easel®
Material Description Price
Black Corian®

Black Corian®

Thickness: 1/2 in, Dimensions: 8 in × 12 in, Cut Tolerance: +/- 1/8 in

$76.54

Purple MDF Sheet

Purple MDF Sheet

Dimensions: 12 in × 12 in, Thickness: 3/8 in, Color: Purple, Type: MDF

$7.00

Add to Cart

$83.54
from Inventables

File Description Unit Price

Candle.svg

$0

Download Zip

$0
from Inventables

1

Cut Wall Sections

Cut a set of wall sections out of the MDF color of your choice. This is a good time to use double sided tape and avoid cutting all of those tabs.

Use this EASEL link

2

Cut Flip Mill Holes

Cut registration holes for flip milling the corian base. Make sure your piece is 6" tall and between 10" to 12" wide.

Use this EASEL link

3

Mill Top Features

For this cut use a square or fishtail 1/8" endmill.

Use this EASEL link

4

Flip and Mill Chamfer

Flip the part over, using the registration holes as guidance. Mill the Chamfer onto the base, which will also cut the parts profile.

Use this EASEL link

5

Fit and Finish

The wall sections may require light sanding for a proper fit. You want these to fit, but be tight enough to stay in place without glue.