Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

childs rocking chair

25 likes
762 opens
302 copies
25 comments
Jeff Richmond

Project by

Jeff Richmond

General Information

I made these for my grandaughters and two friends decided they needed to buy them for theirs.

Like this project Open in Easel®
Material Description Price
Baltic Birch Plywood

Baltic Birch Plywood

Daniel Harasim
plans? make public?
Daniel Harasim
Jeff Richmond
https://easel.inventables.com/projects/fa78CNZ_EsubXCTS-Qzd6A give it a spin
Jeff Richmond
wayne hall
You have not made the plans public.
wayne hall
Jeff Richmond
Wayne the public box is checked and the link is there what else can i do. Help me help you
Jeff Richmond
wayne hall
I don't know. When you click on it it says it is not shared publicly.
wayne hall
Jeff Richmond
try to copy and paste this https://easel.inventables.com/projects/fa78CNZ_EsubXCTS-Qzd6A
Jeff Richmond
Tim Kipp Sr
Link still not working - Open your project in Easel - Click File - Publish - Looks like a fun project! Be great if you Published it.
Tim Kipp Sr
Mike Danhauer
Looks like a great project. Would love to make for my grandkids. Can you try to Publish this?
Mike Danhauer
Jeff Richmond
Okay guys i think i got it this time
Jeff Richmond
Jeff Richmond
Thank you Mike Danhauer for letting me know how to get this to y'all
Jeff Richmond
Le Roy Chappell
What are the dimensions of the plywood (especially the thickness)? Is it 1/8 or 1/2?
Le Roy Chappell
Jeff Richmond
Le Roy the material is 1/2" baltic birch
Jeff Richmond
Jeff Richmond
All you that copied this file how did they spin???
Jeff Richmond
David Ireland
Any idea the weight limit of this chair
David Ireland
Jeff Richmond
David Ireland, these are very stout using 1/2 Baltic birch. I have no doubt they could hold 150# but don’t know of any 150# 3-7 year olds
Jeff Richmond
Paul Demeyer
Jeff, trying to figure out where one of the cross members goes. The plan has two narrow and two wider one. Can you send another picture that shows all of the members installed.
Paul Demeyer
Jeff Richmond
Paul i have since refined the drawings however have not posted themthe second large peice shouldnt be there
Jeff Richmond
timothy orourke
when I open the project I only have one page, two parts of the chair, where do I find the rest of it
timothy orourke
Narciso Martinez
these are very nice. how much do you charge for one of these?
Narciso Martinez
Jeff Richmond
Narciso Martinez the few I have sold went for $120, mostly I just made them for my granddaughters.
Jeff Richmond
Narciso Martinez
I carved one out just for fun and they are very nice and sturdy. great job
Narciso Martinez
Kenny Byrom
Jeff, Great Project. I have one question. Can this be carved on the 750 x 750 X Carve? This is the one I have. What size X Carve did you carve these on? Thanks in advance Kenny Byrom
Kenny Byrom
Jeff Richmond
My xcarve is 1000 So I am not sure if it will work on the 750 try it and see if it fits
Jeff Richmond
Sam Smothers
Jeff - is this meant to be cut on the shape or outside. When I carved on the shape, it was super tight to the point I needed a hammer to assemble and could not get slots fully seated.
Sam Smothers
Jeff Richmond
I’ll be honest Sam it has been sometime since I made one of these, however I do remember using a dead blow putting them together, if you use a sanding block on the inside of the slots you should get some relief. You don’t want the joints to be sloppy because kids will be kids
Jeff Richmond