Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Copy of Laptop Stand for x-carve

1 like
8 opens
4 copies
0 comments
Dennis A McAlister

Project by

Dennis A McAlister

General Information

I redesigned the laptop stand with an additional swivel for easier use

Like this project Open in Easel®
Material Description Price
Carbide Tip Straight 2 Flute - 1/8 in Cutting x 1/8 in Shank

Carbide Tip Straight 2 Flute - 1/8 in Cutting x 1/8 in Shank

Quantity: 1, Shank Diameter: 1/8 in, Cutting Diameter: 1/8 in

$5.99

Add to Cart

$5.99
from Inventables

1

What I did

1 minute

I used the original file and adjusted a few things then after I made it I realized that an additional swivel would make it better.

2- 5/16″ × 4 1/2" bolts
1- 5/16″ × 2 1/2" bolt
1- 5/16″ × 1 1/2" bolt
4- 5/16" nuts
12-5/16" washers
1 1/4" course thread screws
Gorilla Wood glue

I used 3/4" plywood and 3/4" MDF that I had in the shop. I put all the components on one sheet 24′ × 24′ × 3/4" plywood, the laptop shelve I used 3/4" MDF it measured 12″ × 20″ then added a 1 1/4’ X 20" as a stop. I put a 1" diameter hole 3/8" deep in the laptop shelf to cover the 5/16" bolt head and washer on the top swivel.