Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Daschund Buffet

2 likes
78 opens
27 copies
286 downloads 0 comments
Jody

Project by

Jody
North Las Vegas, USA

General Information

A little buffet for my two little shop helpers. Finished with butcher block oil, the bowl does hold water. Although with two dogs I just use them both for food.

Like this project Open in Easel®
Material Description Price
Baltic Birch Plywood

Baltic Birch Plywood (×2)

18" × 24" × 1/8" Baltic Birch Plywood

Carbide Tip Fish Tail Downcut - 1/8 in Cutting x 1/8 in Shank

Carbide Tip Fish Tail Downcut - 1/8 in Cutting x 1/8 in Shank

1/8" Downcut Fish Tail Carving Bit

$10.99

Carbide Tip V-Bit 60 Degree - 1/2 in Cutting x 1/4 in Shank

Carbide Tip V-Bit 60 Degree - 1/2 in Cutting x 1/4 in Shank

Shank Diameter: 1/4 in, Cutting Diameter: 1/2 in, Tip Angle: 60 Degree

$15.91

This project's Bill of Materials is not complete.

$26.90
from Inventables

File Description Unit Price

Dogbowl.zip

dogbowlfiles

$0

Download Zip

$0
from Inventables

1

Glue and tack

60 minutes

This was simple assembly. I just used glue on all edges, the 3/4 inch brad nails to tack everything together. Sanding was minimal, just around the edges to soften them.

Bowl assembly, just used glue then clamp tight on four sides over night.

I used a Butcher Block oil on everything, to keep it food safe for the pups. Actually 3 solid coats and the bowls would hold water if needed. Don’t really recommend water, I have two dogs so both bowls just hold hard foods.

The two Aliens were just fillers from the cut out of the dog bowl holding spots. Plus gave me an extra chance to use some of the Easel Pro library clip art. Hate to waste wood, so I carved the aliens in both cut out circles. Good decoration for the shop, I live close to Area 51 so embrace your surroundings and let no wood go to waste.