Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Greyhound Fidget Spinner

0 likes
4 opens
0 copies
0 comments
Jeremy Hill

Project by

Jeremy Hill

General Information

Greyhound Fidget Spinner cut in acrylic. I used a tapered bit but found some burs on the edges so may try to use a 1/16" bit or 1mm ball nose in follow-on attempts. I used a propane torch to clean up the burs and edges which came out pretty well overall.

Like this project Open in Easel®