Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

KeyTag

11 likes
138 opens
77 copies
0 comments
John Maher

Project by

John Maher

General Information

A simple key tag project. CNC Level: Beginner.

I used some 3mm ply, a 1/16 flat end bit, a 2418 grbl woodpecker cnc machine and some finishing stain.

Change the text as required and check the depth of the cut is suitable for your blank.
Enjoy!

Like this project Open in Easel®