Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Locker Organizer

24 likes
80 opens
13 copies
599 downloads 1 comment
Beyond Design

Project by

Beyond Design
Chicago, Illinois

General Information

A wall mounted organizer with a mirror and pegboard style grid. Small enough to fit in a locker, but could be used by your front door, at your desk, or anywhere else you need.

Like this project Open in Easel®
Material Description Price
Black HDPE Sheet

Black HDPE Sheet

Thickness: 1/2 in don't use, Dimensions: 8 in × 12 in don't use

Clear Acrylic Sheet - Cast

Clear Acrylic Sheet - Cast

Dimensions: 8 in × 12 in, Thickness: 1/8 in, Material Type: Extruded

$4.99

This project's Bill of Materials is not complete.

$4.99
from Inventables

File Description Unit Price

locker organizer.svg

$0

Download Zip

$0
from Inventables

1

Mill hdpe sheet

Mill half inch HDPE with an 1/8th" bit for the main cut.

Use this EASEL link

2

Mill Acrylic sheet

Mill the acrylic for the top half of the design. A silver mirror acrylic provides a nice mirror surface, or you could use a white acrylic to use as a whiteboard.

Use this EASEL link

3

Assembly

Once all of the parts are cut its time for assembly. The shelf will fit in using the tabs and slots, no glue should be needed. The mirror can be glued onto the front face after the shelf is in (make sure the shelled out portion is on the back). You can mount this to the wall with double sided tape such as the 3M adhesive strips.

4

Accessories

The dot grid is designed to the same dimensions of a standard pegboard. You can buy standard hooks from a hardware store to fit into the system. Or if you have a 3d printer available you can design your own accessories!