Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Longer XCARVE Holding Clamp

234 opens
114 copies
1 comment

Project by


General Information

Custom X carve holding clamp 6.5″ × 1.5″ milled in 1/2" birch plywood with recessed washer and screw slot. I’m using a custom waste board with 3" spaces between clamp screw inserts. I’ve also clamped these upside down and milled a .25" wide, .1875 deep tip to grip thinner stock better.

Like this project Open in Easel®