Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Which X-Carve is Right for You? Learn More.

Picnic Plate

124 opens
39 copies
398 downloads 0 comments
Antonio Hernandez Menchaca

Project by

Antonio Hernandez Menchaca
Mexico City, Mexico

General Information

This design allows you to take the essentials for a picnic in a single package. The package includes a main plate, cutlery and side plate for condiments, which join through rare earth magnets. Check Instructions for further explanation!

Like this project Open in Easel®
Material Description Price
Bamboo Plywood

Bamboo Plywood (×2)

Thickness: 3/8 in., Plies: 7 ply, Dimensions: 12 in × 12 in


Clear Acrylic Sheet - Cast

Clear Acrylic Sheet - Cast

Dimensions: 12 in × 12 in, Thickness: 1/4 in, Material Type: Cast


from Inventables

File Description Unit Price




Download Zip

from Inventables



5 minutes

For this project you will need to following materials:
- 12 × 12 inch 3/8 inch Bamboo Plywood
- 8 × 8 inch 1/4 inch Clear Acrylic Sheet
- (12) 4 mm wide 2 mm deep rare earth magnets
- 150 grit sandpaper



55 minutes

Set and fasten your pieces and carve them. This should take about 55 mins without taking material change into consideration.


Chamfer Edges (Optional)

5 minutes

If you have a router with a roundover bit, rounder over the edges with curves on the bottom side of the plates.



5 minutes

Sand all the edges down with your sandpaper until they’re nice and smooth.



5 minutes

Dip the bamboo plywood in mineral oil for a food safe finish.