Picture Frame

42 likes

526 opens

165 copies

Material			Description	Price
		Carbide Tip Upcut 2 Flute - 1/4 in Cutting x 1/4 in Shank

Video

Video

60 minutes

here is a video of how i made the frame there isn’t much to it but it works well.

Can you send link to the router bit used ?
Daniel Harasim

Hi Daniel i get most of my bits for my CNC from sorotec.de in germany this is the actual bit i used https://www.sorotec.de/shop/Cutting-Tools/sorotec-tools/1-8-tools/1-8--Shaft-Mill-Tools/Special-Lengths-360/2-Flute-365/
john Tansley

and i used one of these cheap rabbeting bit of ebay https://www.ebay.co.uk/sch/sis.html?_nkw=1%2F4+Inch+Shank+Rabbeting+Router+Bit+with+6+Bearings+Set+for+Multiple+Depths+M5J7&_id=254319018790&&_trksid=p2057872.m2749.l2658
john Tansley

What size would you make this to fit a 4x6 photo?
Andrew morrison

Hi Andrew, the opening in the middle would have to be a bit smaller than 4x6. so you would need to adjust the design to your needs.
john Tansley

Picture Frame

Project by

General Information

Carbide Tip Upcut 2 Flute - 1/4 in Cutting x 1/4 in Shank

Video