Email Support

Snowman Tray

72 likes
794 opens
339 copies
1 comment
Rafael Rivera

Project by

Rafael Rivera

General Information

Be free to modify it.

Like this project Open in Easel®
1

Cut Material

4 minutes

Cut your favorite piece of wood at 6.5" L x 10" W x .75" thick.

2

Clamp

2 minutes

Hold down your material.

3

Start Carving

Adjust your tray depth if needed.

I used a 5 flutes 1/4" endmill.

Custom Rates:
- 100 in/min Feed Rate
- 40 in/min Plunge Rate
- 0.125 in/min Depth Per Pass

4

Paint/Finish

20 minutes

Pain or Stain it. I used acrylic water based paint.

5

Clear Coat

30 minutes

I gave two Gloss Clear coat.

Made one? Log in to add yours

Arjay Henshall
Can you tell me more about what bit you used please? id love to give this project a go for make for my niece this year
Arjay Henshall