Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

Vegas Golden Knights epoxy inlay

1 like
12 opens
6 copies
0 comments
Melvin Rooter Woodworks

Project by

Melvin Rooter Woodworks
Las Vegas, USA

General Information

Epoxy inlay charcuterie board

Like this project Open in Easel®
1

Bits, Feeds & Speeds

I used the following bits:

Cadence Manufacturing 1/4 Jenny Upcut
Feed: 100 IPM
Plunge: 33 IPM
Depth per pass: 0.125 IN

Cadence Manufacturing 1/8 Jenny Upcut
Feed: 90 IPM
Plunge: 49 IPM
Depth per pass: 0.06 IN

Cadence Manufacturing 30-degree downshear V Bit
Feed: 60 IPM
Plunge: 30 IPM
Depth per pass: 0.06 IN