Email Support | Mon - Fri: 9am - 5pm Sun: 12pm - 4pm CT | Call Support: 312-775-7009

x-carve lift.gcode

19 likes
28 opens
13 copies
0 comments
JEFF HILL

Project by

JEFF HILL

General Information

sized to fit 3 1/2 in material and still reach waste board with smaller bits. materials used 12 × 12 × 1/4 aluminum. (8) m5-.80 × 20 hex cap screws used for top rails, use old top screws on bottom rails. Finish drilling holes with 3/16 bit. Total size in 2 1/2 inches x 6 inches tall

Like this project Open in Easel®